Self-Aligning Ball Bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing , which can be caused, for example, by shaft deflection.A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.
Self-Aligning Ball Bearings utilize two rows of balls and a common, concave outer race to automatically compensate for angular misalignment within a system. Misalignment, either from machining errors, assembly errors, or deflections, are a common risk in precise applications and Self-Aligning Ball Bearings present a viable solution.
- 35 mm x 80 mm x 31 mm FAG 2307-K-TVH-C3 Self-Aligning Ball Bearings
- 0 Inch | 0Millimeter
- M06288
- 100 mm x 215 mm x 47 mm FAG 1320-M Self-Aligning Ball Bearings
- 2 Seals
- Bearing
- 45 mm x 100 mm x 25 mm FAG 1309-TVH Self-Aligning Ball Bearings
- 4026677950918
- N/A
- 50 mm x 90 mm x 20 mm FAG 1210-K-TVH-C3 Self-Aligning Ball Bearings
- BEARINGS LIMITED
- B04144
- 75 mm x 160 mm x 55 mm FAG 2315-K-M-C3 Self-Aligning Ball Bearings
- B04144
- Roller Bearings
- 90 mm x 160 mm x 30 mm FAG 1218-TVH Self-Aligning Ball Bearings
- 0808250417865
- AMI BEARINGS