| 11.30.2031.601.41.1503 Standard 5 Slewing Ring Bearings | Full Timken Part Number:SAF23038K6-13/16; H:13.3125 in; Triple Seal Reqd:LOR 153; D:2.6250 in; Seal Type:Triple Ring Seal; F:3.75 in; Assembly Weight:220.000 lb; Adapter Assembly Number1:SNW-3038 x 6-13/16; Bolt Holes:4; C:6.250 in; Diameter S-1:6 13/16 in; E Max.:19.2500 in; B:22.00 in; Stabilizing Ring 1 Reqd3:SR-32- 0; Bolt Hole Length:1.9375 in; Bolt Hole Width:1.000 in; A:6.6875 in; Housing Only2:SAF038K x 6-13/16; |
| 162.36.1700.890.11.1503 Standard 5 Slewing Ring Bearings | Enclosure:Open; Dynamic Load Rating:67,500 N; D:100 mm; Static Load Rating:56,500 N; d:55 mm; Bore Type:Cylindrical Bore; Configuration:Double Row; Limiting Speed - Oil:6,300 rpm; Limiting Speed - Grease:4,500 rpm; da:64 mm91 mm; Fillet Radius/Chamfer:1.5 mm; Dx:108 mm; Radial Clearance:0.023 to 0.043 mm; B:33.3 mm; ra:1.5 mm; Cy:5.4 mm; Weight:0.960 kg; |
| 162.36.1800.891.41.1503 Standard 5 Slewing Ring Bearings | Bore Type:Cylindrical Bore; Configuration:Single Row; Weight:5.640 kg; Limiting Speed - Grease:3,100 rpm; r1:1.1 mm; Fillet Radius/Chamfer:3 mm; d:90 mm; Limiting Speed - Oil:4,200 rpm; Dynamic Load Rating:148,000 N; a:37.2 mm; Enclosure:Open; D:190 mm; B:43 mm; Static Load Rating:124,000 N; |
| 61.50.2130.001.49.1504 Standard 5 Slewing Ring Bearings | Weight:0.407 kg; Radial Clearance:0.018 to 0.036 mm; ra (max):1 mm; Bore Type:Cylindrical Bore; Factor fo:14.1; Limiting Speed - Grease:7,800 rpm; Enclosure:Double Shield; Configuration:Single Row; d:45 mm; Da (max):78 mm; Static Load Rating:20,500 N; da (min):52 mm; Fillet Radius/Chamfer:1.1 mm; B:19 mm; D:85 mm; Dynamic Load Rating:32,500 N; |
| 12.40.2199.300.11.1502 Standard 5 Slewing Ring Bearings | C0r - Static Load Rating:5.40 kN; Outside Ring Width B:17.000 mm; Cr - Dynamic Load Rating:11.4 kN; Grease Reference Speed:19000 rpm; Outside Diameter D:42.000 mm; Features:Contact Seals; Bore Size d:15 mm; Radius Rs min:1.000 mm; Weight:0.1 Kg; Clearance:C3; Grease Limiting Speed:19000 rpm; |
| 91.30.1799.991.21.1502 Standard 5 Slewing Ring Bearings | Tolerance1:-0.008 in; D1:43.005 in; Sleeve:S-30/950; B2:16.492 in; Diameter d :35 7/16 in; Series:230K; Locknut:N-950; Taper:1:12; Lockwasher and Lockplates:P-950; Bearing Number:230/950K; S:4.141 in; |
| 62.30.1250.001.21.1504 Standard 5 Slewing Ring Bearings | C - Cup Width:1.8898 in; Ab - Cage-Cone Frontface Clearance:0.2 in; K - Factor7:1.83; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:48000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:83600 lbf; e - ISO Factor8:0.32; da - Cone Frontface Backing Diameter:7.52 in; Design Units:Imperial; Cup Part Number:HM237513; D:11.4163 in; Aa - Cage-Cone Backface Clearance:0 in; |
| 11.40.2240.000.11.1502 Standard 5 Slewing Ring Bearings | Static Load Rating:2,390 N; Weight:0.032 kg; Cy (max):2.9 mm; ra (max):0.6 mm; Fillet Radius/Chamfer:0.6 mm; Factor fo:13.2; D:30 mm; Enclosure:Open; Dynamic Load Rating:5,100 N; d:10 mm; Limiting Speed - Grease:25,000 rpm; Limiting Speed - Oil:30,000 rpm; r1:0.5 mm; Da (max):25 mm; Radial Clearance:0.008 to 0.023 mm; Groove Width:1.4 mm; Dx (min):35.5 mm; a (max):2.1 mm; Bore Type:Cylindrical Bore; |
| 61.40.1800.013.19.1503 Standard 5 Slewing Ring Bearings | Limiting Speed - Grease:3,400 rpm; Configuration:Single Row; ra (max):2 mm; Enclosure:Open; D:170 mm; B:32 mm; Weight:3.080 kg; r1:2.1 mm; Radial Clearance:0.075 to 0.110 mm; Bore Type:Cylindrical Bore; dc (min):116 mm; Limiting Speed - Oil:4,000 rpm; db (min):107 mm; Da (max):158 mm; d:95 mm; dd (min):123 mm; Static Load Rating:259,000 N; db (max):111 mm; Fillet Radius/Chamfer:2.1 mm; Dynamic Load Rating:222,000 N; |
| 11.35.2620.000.11.1503 Standard 5 Slewing Ring Bearings | G2 - Heat Generation Factor (Rib-Roller End):25.7; K - Factor2:1.36; Series:M612900; r - Cup Backface To Clear Radius1:2.54 mm; Cg - Geometry Factor:0.112; Db - Cup Backface Backing Diameter:103.12 mm; Design Units:METRIC; C - Cup Width:23.000 mm; Cup Part Number:JM612910V; e - ISO Factor3:0.43; D:115.000 mm; Y - ISO Factor4:1.39; G1 - Heat Generation Factor (Roller-Raceway):76.7; Da - Cup Frontface Backing Diameter:110.00 mm; |