| AMI KHR206-20 Ball Insert Bearings | Comparative axial load rating CFa:278 kN; Fatigue load limit Pu:1290 kN; Comparative radial load rating CF:1730 kN; d:384.175 mm; D:546.1 mm; r3,4 min.:1.5 mm; Thrust factor K:1.76; Basic static load rating C0:16600 kN; Calculation factor e:0.33; D1 ≈:520 mm; |
| 60 mm x 110 mm x 65,07 mm Timken GYE60KRRB Ball Insert Bearings | Calculation factor Y0:0.4; D:120 mm; d1 ≈:88.4 mm; Basic dynamic load rating C:149 kN; Db min.:113 mm; Cb min.:10.5 mm; Basic static load rating C0:137 kN; d:55 mm; rb max.:2 mm; Ca min.:4 mm; Size (mm):60 mm x 110 mm x 65,07 mm ; |
| 50 mm x 90 mm x 51,59 mm Timken GYE50KRRB SGT Ball Insert Bearings | Hydraulic nut:HMVC 28E; Lock nut:N 028; d3 max.:165.227 mm; Mass adapter sleeve assembly:3.8 kg; d:140 mm; Lock washer:W 028; Threads per inch:12; d1:127 mm; Sleeve:S 3028x5; G:139.624 mm; Size (mm):50 mm x 90 mm x 51,59 mm ; |
| Browning LS-120S Ball Insert Bearings | H2:95.25 mm; PG:1/4 NPT; P60°:423 kN; End plug (suffix Y):EPR 23; Housing:SAF 544; J max.:708.025 mm; PosiTrac Plus contact element:2 x B10724-167; J min.:628.65 mm; Cap bolt:4 x 1-8 UNC; Initial grease fill:2749.95 g; |
| 55,5625 mm x 100 mm x 55,56 mm Timken G1203KLLB Ball Insert Bearings | Threads per inch:12; Hydraulic nut:HMVC 26E; d3 max.:171.577 mm; Lock washer:W 26; d1:114.3 mm; B4:25.4 mm; Lock nut:AN 26; B1:126.289 mm; Mass adapter sleeve assembly:5.65 kg; B:22.479 mm; Size (mm):55,5625 mm x 100 mm x 55,56 mm ; |
| 50 mm x 90 mm x 30,18 mm Timken GRAE50RRB Ball Insert Bearings | B:11.00 mm; Accessories:One Shield & Snap-Ri; Oil Speed Rating n2:26000 rpm; Basic Dynamic Radial Load Rating C:8060 N; D:35.0000 mm; Basic Static Radial Load Rating Co:3400 N; Fillet Radius ra:0.64 mm; Sealed Speed Rating n3:15000 rpm; d:10.000 mm; Grease Speed Rating Open/Shielded n1:20000 rpm; Size (mm):50 mm x 90 mm x 30,18 mm ; |
| 33,3375 mm x 72 mm x 37,7 mm Timken G1105KRRB Ball Insert Bearings | Da min.:961 mm; Mass bearing + sleeve:1000 kg; Operating clearance factor k2:0.11; B:250 mm; Da max.:1062 mm; ra max.:6 mm; d1:710 mm; d2 ≈:854 mm; Ba min.:26 mm; da max.:852 mm; Size (mm):33,3375 mm x 72 mm x 37,7 mm ; |
| AMI SUE205FS Ball Insert Bearings | rb max.:2.5 mm; Calculation factor kr:0.08; Da max.:624 mm; d2 ≈:434.69 mm; a:261 mm; Basic dynamic load rating C:806 kN; D1 ≈:533.9 mm; Calculation factor X:0.35; Calculation factor Y2:0.57; |