| 23,8125 mm x 52 mm x 34,92 mm Timken G1015KRRB Ball Insert Bearings | H:244.475 mm; End plug (suffix Y):EPR 13; Cap bolt, SAE grade:8; P90°:107 kN; A1:120.65 mm; Da:200 mm; Housing:SSAFS 522; P120°:66.7 kN; P60°:178 kN; P180°:72.5 kN; Size (mm):23,8125 mm x 52 mm x 34,92 mm ; |
| 25,4 mm x 52 mm x 34,92 mm Timken G1100KLLB Ball Insert Bearings | Mass pillow block:39 kg; Cap bolt:5/8-11 UNC; S:4.763 mm; Labyrinth ring (db shaft position):LOR 118; Stabilizing ring:SR-20-17; P180°:57.4 kN; H1:114.3 mm; RG:3/8 NPT; Initial grease fill:365.71 g; dc:96.838 mm; Size (mm):25,4 mm x 52 mm x 34,92 mm ; |
| 50,8 mm x 100 mm x 55,56 mm Timken 1200KRR Ball Insert Bearings | Basic dynamic load rating C:158 kN; da:69.85 mm; H:165.894 mm; J max.:223.838 mm; H2:57.15 mm; L:265.113 mm; Limiting speed:950 r/min; s:31.75 mm; Attachment bolt diameter G:19.05 mm; A:68.263 mm; Size (mm):50,8 mm x 100 mm x 55,56 mm ; |
| Link-Belt ER205 Ball Insert Bearings | d:1000 mm; D1 ≈:1003.5 mm; Basic dynamic load rating C:572 kN; d1 ≈:1086.5 mm; D:1090 mm; Fatigue load limit Pu:63 kN; Da max.:1037 mm; Minimum load factor A:160; Basic static load rating C0:5500 kN; Mass bearing (including seat washer where applicable):68.5 kg; |
| AMI SUE209-28 Ball Insert Bearings | ba:35.719 mm; Bearing:22217 EK; h:34.925 mm; Max. speed for Taconite seal:1050 r/min; RG:3/8 NPT; P60°:78.7 kN; Taconite seal:TER 52; End plug (suffix Y):EPR 9; P180°:32 kN; Cap bolt:2 x 5/8-11 UNC; |
| 50 mm x 90 mm x 30,18 mm Timken GRAE50RRB Ball Insert Bearings | B:11.00 mm; Accessories:One Shield & Snap-Ri; Oil Speed Rating n2:26000 rpm; Basic Dynamic Radial Load Rating C:8060 N; D:35.0000 mm; Basic Static Radial Load Rating Co:3400 N; Fillet Radius ra:0.64 mm; Sealed Speed Rating n3:15000 rpm; d:10.000 mm; Grease Speed Rating Open/Shielded n1:20000 rpm; Size (mm):50 mm x 90 mm x 30,18 mm ; |
| AMI MUC202-10 Ball Insert Bearings | L:720 mm; R2:41 mm; Q180°:900 kN; A2:225 mm; bc:226 mm; Appropriate attachment bolt, size G:36 mm; db:188 mm; Q120°:1800 kN; H1:260 mm; A:330 mm; |
| 28,575 mm x 72 mm x 36,51 mm Timken SMN102K Ball Insert Bearings | ba:36.513 mm; Taconite seal:TER 43; N1:19.05 mm; Pa:9.43 kN; End plug (suffix Y):EPR 10; A2:233.363 mm; RG:3/8 NPT; Mass pillow block:29.8 kg; H:209.55 mm; Da:170 mm; Size (mm):28,575 mm x 72 mm x 36,51 mm ; |