Ball Insert Bearings
Ball bearings consist of a series of round balls in a casing, within an inner and outer ring capable of supporting both radial and axial (thrust) loads.Ball bearings can support moderate radial loads and moderate axial loads (parallel to the shaft). They can operate at high speeds. Ball bearings with shields or seals for protection are usually lubricated to last for the operating life. Miniature & Instrument Series, Stainless Steel - Inch and Metric.
Bearings Direct supplies insert ball bearings for housing and industrial equipment use. These insert bearings come in a variety of configurations for various duty strength applications.Insert bearings Insert bearings are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ring with a specific locking device, enabling quick and easy mounting onto the shaft.
- 61,9125 mm x 145 mm x 61,91 mm Timken SMN207KS Ball Insert Bearings
- 2.67 kg
- 7500 r/min
- 23,8125 mm x 52 mm x 34,92 mm Timken G1015KRRB Ball Insert Bearings
- 244.475 mm
- EPR 13
- 15,875 mm x 40 mm x 27,78 mm Timken 1010KRR Ball Insert Bearings
- 180 mm
- 1900 r/min
- 23,8125 mm x 52 mm x 34,92 mm Timken 1015KRR Ball Insert Bearings
- 4300 rpm
- 154000 N
- 55,5625 mm x 100 mm x 32,54 mm Timken RA203RRB Ball Insert Bearings
- Two Shields
- 21.00 mm
- AMI UCX10-31 Ball Insert Bearings
- 2.1 mm
- 196 kN
- 25,4 mm x 62 mm x 34,93 mm Timken SMN100K Ball Insert Bearings
- 1 max
- 32.678 kN
- 25,4 mm x 47 mm x 17,46 mm Timken RAL100NPPB Ball Insert Bearings
- 36.00 mm
- 1.00 mm