Self-Aligning Ball Bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing , which can be caused, for example, by shaft deflection.A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.
Self-Aligning Ball Bearings utilize two rows of balls and a common, concave outer race to automatically compensate for angular misalignment within a system. Misalignment, either from machining errors, assembly errors, or deflections, are a common risk in precise applications and Self-Aligning Ball Bearings present a viable solution.
- NSK ly25 Bearing
- 0
- N/A
- 85 mm x 180 mm x 60 mm FAG 2317-K-M-C3 Self-Aligning Ball Bearings
- 5.844 Inch | 148.438
- 2 Bolt Flange Block;
- 50 mm x 110 mm x 27 mm FAG 1310-K-TVH-C3 Self-Aligning Ball Bearings
- 31171501
- 0 Inch | 0 Millimete
- 40 mm x 80 mm x 18 mm FAG 1208-K-TVH-C3 Self-Aligning Ball Bearings
- 1 Rib Inner Ring and
- Angular Contact Ball
- 110 mm x 200 mm x 53 mm FAG 2222-K-M-C3 Self-Aligning Ball Bearings
- 1 Piece Solid
- Flange Block
- 6 mm x 19 mm x 6 mm FAG 126-TVH Self-Aligning Ball Bearings
- Ball
- 6.693 Inch | 170 Mil
- 25 mm x 62 mm x 17 mm FAG 1305-TVH Self-Aligning Ball Bearings
- UC204
- Cast Iron
- 65 mm x 120 mm x 31 mm FAG 2213-TVH Self-Aligning Ball Bearings
- M06288
- Bearings
- 45 mm x 85 mm x 19 mm FAG 1209-TVH Self-Aligning Ball Bearings
- Mounted Units &
- LINK BELT